Description
The Sea to Summit Lightweight Dry Sack is a less expensive and less bulky alternative to traditional dry bags. You can squash these into spots ordinary heavy dry bags won’t go. Fits into little corners of a sea kayak or light enough to take backpacking or adventure travelling. Suitable to keep contents dry in any wet situation where the bag is not submerged.
FEATURES
Lightweight 70D nylon with fully taped seams
10,000mm waterhead, lightweight durable nylon
White interior for greater interior visibility
Hypalon roll top closure
D-ring attachment point at buckle
Features Field Repair Buckles for a better seal and ease of replacement
Round base on all sizes
Use: backpacking, cycle touring, paddling, general boating
| Material | 100% Nylon | |
| Weight | 1L | 30g |
| 2L | 38g | |
| 4L | 44g | |
| 8L | 58g | |
| 13L | 72g | |
| 20L | 86g | |
| 35L | 115g | |
| Diameter x Height | 1L | Ø11 x 24cm |
| 2L | Ø13 x 29cm | |
| 4L | Ø15 x 33cm | |
| 8L | Ø17 x 46cm | |
| 13L | Ø22 x 53cm | |
| 20L | Ø25 x 61cm | |
| 35L | Ø30 x 70cm |
PROPER USE:
This lightweight dry sack must be closed properly to ensure water can’t get in. Begin by folding the Hypalon® strip down first and be sure to have at least three rolls before closing the buckle.
Avoid contact with sharp objects or subjecting the sack to high abrasion, as this could compromise the waterproof fabric.
Like all manufacturers of roll-top, fabric dry sacks, Sea to Summit recommends that sensitive electronic devices be ‘double bagged’ (i.e. putting electronics inside one dry sack then placing this inside a second dry sack). For maximum protection, the use of a waterproof hard case should be considered.
Not intended for situations where dry sack will be submerged under water.
NB: While this lightweight dry sack is designed to protect gear from rain and water dunking accidents it cannot guarantee to protect electronic gear when fully submerged. For this we recommend fully rated IPX standard diving protection cases.
Reviews
There are no reviews yet.